Brother P-Touch 9200DX Guía De Referencia Rápida página 22

] In the Available port types list box, select "Brother P-
touch USB Port", and then click the New Port button.
^ When the message "Automatically adds if the product
is connected" appears, click the OK button.
a Close the Printer Ports dialog box.
b In the Brother PT-9200DX Properties dialog box that
appears, check that there is a check mark beside
"PTUSB (PT-9200DX-XXXXXXXXX):" (where
XXXXXXXXX is the serial number), and then click the
Close button.
. Be sure to select the port with the serial number
that is the same as the P-touch serial number,
otherwise printing cannot be carried out properly.
The serial number is written above the barcode on
the silver label attached to the bottom of the P-
touch.
c In the USB message dialog box, click the Finish
button.
d In the Setup Complete dialog box that confirms that
installation is complete, select "Yes, I want to restart
my computer now.", and then click the Finish button
to restart the computer.
19