36
1
3
2
1. Make sure that both Isosafe connectors are securely
attached to their ISOFIX anchor points. The colors of the
indicators on both Isosafe connectors should be completely
green.
-1
36
2. The booster can not be used if the vehicle safety belt
buckle (female buckle end) is too long to anchor the booster
securely.
-2&
-3
36
36
3. Make sure that tether hook are securely attached to the
anchorage fitting. The colors of the indicators on tether
strap adjuster should be completely green.
21
4. Position shoulder belt through the shoulder belt guide
4
37
5
5. It is very important to ensure that any lap strap is worn
6. To ensure the correct head support height is obtained, the
-4
36
shown in
-5
36
low down, so that the pelvis is firmly engaged. The booster
is shown as
36
bottom of the headrest MUST be even with the top of
child's shoulders as shown in
be positioned in the red zone as shown in
38
and the shoulder belt must
37
38
22