For Safety; Grounding Instructions; Safety Labels - Tornado MINI-MARATHON 425 Manual Del Usario

All operators must read, understand, and practice
the following safety precautions.

FOR SAFETY:

1. Do not operate machine :
• Unless trained and authorized
• Unless operator manual is read and
understood
• In flammable or explosive area.
• Unless cord is properly grounded
• With damaged cord or plug
• If not in proper operating condition
• In outdoor area
• In standing water
• With the use of an extension cord
2. Before operating Machine
• Make sure all safety devices are in place
and operate properly
3. When using machine
• Do not run over cord
• Do not pull machine by plug or cord
• Do not pull cord around sharp edges or
corners
• Do not unplug by pulling on cord
• Do not stretch cord
• Do not handle plug with wet hands
• Keep cord away from heated surfaces
•
Report machine damage or faulty
operation immediately
•
Follow mixing and handling instructions
on chemical containers.
1. Before leaving or servicing machine.
•
Turn off machine
•
Unplug cord from wall outlet.
2. When servicing machine
•
Unplug cord from wall outlet
•
Avoid moving parts.
•
Do not wear loose jackets, shirts or
sleeves.
•
Use manufacture supplied approved
replacement parts.

GROUNDING INSTRUCTIONS:

Machine must be grounded. If it should
malfunction or breakdown, grounding
provides a path of least resistance for
electrical shock. This machine is equipped
with a cord having an equipment grounding
conductor and grounding plug. The plug
must be plugged into an appropriate outlet
that is properly installed in accordance
with all local code as ordinances. Do not
remove ground pin; if missing. Replace plug
before use.

SAFETY LABELS:

The safety labels appear on the machine
in the locations indicated. Replace labels if
they become damaged or illegible.
5