Ecolab EcoAdd Serie Instrucciones De Servicio página 258

Control / software
Fig. 29: Overview: Metering mode
Factory setting: Standard
Selection of the metering mode:
1.
[Open main menu] by pressing the [Menu button]
Ä Chapter 7.7 'Main menu' on page 67.
2. [Configuration] selection:
3. [Metering mode] selection.
ð Screen switches to [Metering mode].
4. Setting [Metering mode] selection:
The following settings can be selected:
n S-standard
n M-medium
n L-low
V-variable
n
5. Press the
ð The screen changes to: [Main menu].
6.
Press the
ð The screen switches back to the [operating display] .
417102276 Rev. 3-01.2019
Ä Chapter 7.10 'Overview - Configuration' on page 87
Ä Chapter 7.8.1 '[Metering mode] [Select V-variable]' on page 71
button to save your settings.
button.
70
: