Service Interval] - [Variable] - Ecolab EcoAdd Serie Instrucciones De Servicio

7.10.11.1 [Service interval] - [variable]

Fig. 65: Service interval - variable
After selecting [service interval] - [variable] the setting is saved by clicking the
button. The screen switches to the Configuration overview.
[Service interval] - select:
1. [Main menu] :
2. [Configuration menu] :
3. Scroll to the [service interval] setting using the scrollbar on the right-hand edge of the
screen and select.
4. 'Select variable' .
ð The 'variable' selection box is selected.
5.
[ Press the Next button]
ð Screen change for setting: 'Service interval' / 'weeks' .
6. Enter the number of weeks with the scrollbar.
7.
Press the
ð All settings are saved, and the screen switches back to the Configuration
overview.
8. Pressing the
9.
Pressing the
Ä Chapter 7.7 'Main menu' on page 67
Ä Chapter 7.10 'Overview - Configuration' on page 87
.
button.
button returns to the [Main menu].
button returns to the [Operating display].
107
Control / software
417102276 Rev. 3-01.2019