Metering Mode] [Select V-Variable] - Ecolab EcoAdd Serie Instrucciones De Servicio

9.6.1.1 [Metering mode] [Select V-variable]

Fig. 91: Metering mode: "V-variable"
[Metering mode] - [Select V-variable] - setting:
1.
[Open main menu] by pressing the [Menu button]
Ä Chapter 7.7 'Main menu' on page 67.
2. [Configuration] selection:
3. [Metering mode] selection.
ð Screen switches to [Metering mode].
4. [Metering mode] - [V-variable] selection.
5.
[ Next button]
ð The screen switches to the screen for setting the 'capacity in litres' .
6. 'Set the decimal places of the capacity in litres' using the scroll bar.
7. Select the field for entering the value after the decimal point.
ð The colour changes to dark blue, which indicates that the field is ready for input.
8. 'Set decimal places of the capacity in litres' using the scrollbar.
9.
Pressing the
ð The screen switches to the overview for the [Metering mode].
10. Press the
11. Press the
ð The screen switches back to the [operating display] .
Ä Chapter 7.10 'Overview - Configuration' on page 87
Press.
button saves the setting.
button again to return to the [Main menu].
button.
139
Operation
:
417102276 Rev. 3-01.2019