Liquid Coolant; Silencer - Beta REV-3 Manual Del Usuario

3
GB

LIQUID COOLANT

LIQUID COOLANT LIQUID COOLANT
LIQUID COOLANT LIQUID COOLANT
The level check must be performed with
the engine cold, as follows:
•Remove plastic grid D
•Unscrew cap A A A A A and check the level of
the liquid
•lf the level is dose to the bottom of pipe
proceed to add liquid
Circuit capacity is indicated in the table
on pag. 43.
recommended on the table on pag. 47.
WARNING: WARNING: WARNING:
WARNING: WARNING:
To avoid burns, never unscrew the
radiator filer cap when the engine Is hot.

SILENCER

SILENCER SILENCER
SILENCER SILENCER
If an increase in exhaust noise is noted,
check the silencer.
Proceed as follows:
•Unscrew the two screws B B B B B
•Remove end piece C C C C C
•Extract the preformed part in fiber wool
and substitute with a new one
(disposable as spare-part)
•To reassemble, proceed in the reverse
order.
60
Use the liquids