Declaration Of Conformity - WEG Ex d Manual De Instalación, Operación Y Mantenimiento

The warranty service will be only carried out at WEG Authorized Repair Shops or at WEG's facilities.
Components whose useful life, under normal use, is shorter than the warranty period are not covered by
these warranty terms.
The repair and/or replacement of parts or components, when carried out by WEG and/or any WEG
Authorized Repair Shop, will not give warranty extension.
This constitutes WEG's only warranty in connection with this sale and the company will have no obligation
or liability whatsoever to people, third parties, other equipment or installations, including without limitation,
any claims for consequential damages or labor costs.

7 DEClaRaTIon oF ConFoRMITY

WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000
89256-900 - Jaraguá do Sul – SC – Brazil,
and its authorized representative established in the European Community,
WEGeuro – Industria Electrica SA
Rua Eng Frederico Ulrich, Apartado 6074
4476-908 – Maia – Porto – Portugal
hereby declare that the products:
WEG induction motors and components for use in these motors with types of protection:
IEC frames 90 to 355 (three-phase) and NEMA frame 61 (single and three-phase)
IEC frames 63 to 355 and NEMA frames 143 to 587 (three-phase)
IEC frames 63 to 355 and NEMA frames 143 to 587 (three-phase)
when installed, maintained and used in applications for which they were designed and in compliance with
the relevant installation standards and manufacturer's instructions, comply with the requirements of the
EMC Directive 2004/108/EC (inductions motors are considered inherently benign in terms of
EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 60079-31,
From 29/12/2009 on, low voltage electric motors are no longer considered under the scope of the current
Machinery Directive 2006/42/EC.
CE marking in: 1996
Jaraguá do Sul, 02.2010
- English -
Flameproof Enclosure "d"
Increased Safety "e"
IEC frames 63 to 315 (three-phase)
type of protection "n"
and dust protection by enclosure "tD"
following European Directives and applicable standards:
ATEX Directive 94/9/EC
electromagnetic compatibility)
Standards:
EN 61241-0, EN 61241-1 and EN 60204-1
...............
...............
...............
...............
Directives:
INDUCTION MOTORS FOR HAZARDOUS AREAS | 13
Milton Oscar Castella
Engineering Director