Ec Declaration Of Conformity - WEG W22 Premium E3 Manual De Instalación, Operación Y Mantenimiento

www.weg.net

12. EC DECLARATION OF CONFORMITY

WEG Equipamentos Elétricos S/A
Av. Prefeito Waldemar Grubba, 3000
89256-900 - Jaraguá do Sul – SC – Brazil,
and its authorised representative established in the European Community,
WEGeuro – Industria Electrica SA
Rua Eng Frederico Ulrich, Apartado 6074
4476-908 – Maia – Porto – Portugal
hereby declare that the products:
WEG induction motors and components for using in these motors, with types of protection:
IEC frames 90 to 355 (three-phase) and NEMA frame 56 to 61 (single and three-phase)
IEC frames 63 to 630 and NEMA frames 143 to 9610 (three-phase)
IEC frames 63 to 630 and NEMA frames 143 to 9610 (three-phase)
when installed, maintained and used in applications for which they were designed, and in compliance with the
relevant installation standards and manufacturer's instructions, comply with the requirements of the following
EMC Directive 2004/108/EC (inductions motors are considered inherently benign in terms of electromagnetic
EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 60079-31,
From 29/12/2009 on low voltage electric motors are no longer considered under the scope of the current
CE marking in: 1996
Jaraguá do Sul, April 15 th , 2011.
A list of the EC-Type Examination Certificates covered by the Declaration of Conformity is shown in chapter 13.
122 Manual of Electric Motors
Flameproof Enclosure "d"
...............
Increased Safety "e"
IEC frames 63 to 630 (three-phase)
...............
type of protection "n"
...............
and dust protection by enclosure "t" or "tD"
...............
European Directives and applicable standards:
Directives:
ATEX Directive 94/9/EC
compatibility)
Standards:
EN 61241-0, EN 61241-1 and EN 60204-1
Machinery Directive 2006/42/EC.
Milton Oscar Castella
Engineering Director