Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Section
Initial Settings
09
2 Press
FUNCTION
Press
FUNCTION
play.
3 Select the FM tuning step with 2/3.
Pressing 2/3 will switch the FM tuning step
between 50 kHz and 100 kHz while AF or TA is
on. The selected FM tuning step will appear in
the display.
Note
• The tuning step remains at 50 kHz during
manual tuning.
Setting the DAB Priority
Function
When a hide-away DAB tuner (GEX-P700DAB) is
connected, you can set the product in this mode
so that the interruption of traffic information
from the hide-away DAB tuner takes
precedence over this product's RDS traffic
announcement function.
When it is on
During DAB reception, when the selected ser-
vice component supports road traffic flashes
and transport flashes, reception is not inter-
rupted by this product's RDS traffic announce-
ment.
When it is off
Interruption is by the first received news flash
from among this product's RDS and the hide-
away DAB traffic information broadcasts.
50
En
to select
.
FM
until
appears in the dis-
FM
1 Press
to open the front panel.
OPEN
2 Press
to select
FUNCTION
Press
until
FUNCTION
play.
on or off with 5/∞.
3 Select
DAB
Pressing 5/∞ will switch
on and off and that status will be displayed (e.g.,
).
DAB Priority :ON
Switching Auto PI Seek
The unit can automatically search for a different
station with the same programming, even dur-
ing preset recall.
1 Press
to open the front panel.
OPEN
2 Press
to select
FUNCTION
Press
until
FUNCTION
play.
on or off with 5/∞.
3 Select
A-PI
Pressing 5/∞ will switch
and off and that status will be displayed (e.g.,
).
Auto PI :ON
Switching the warning tone
If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press
to open the front panel.
OPEN
.
DAB
appears in the dis-
DAB
between
DAB Priority
.
A-PI
appears in the dis-
A-PI
between on
Auto PI
Publicidad
Capítulos
Tabla de contenido
