Switching The Flap Auto Open; Switching The Auxiliary Setting; Switching The Dimmer Setting; Selecting The Brightness - Pioneer DEH-P8400MP Manual De Operación

Initial Settings
2 Press to select
FUNCTION
Press until
FUNCTION
display.
on or off with 5/∞.
3 Select
WARN
Pressing 5/∞ will switch
and off and that status will be displayed (e.g.,
).
Warning :ON

Switching the flap auto open

For theft protection, the front panel opens auto-
matically and easily detaches. Flap auto open is
on as a default.
1 Press to open the front panel.
OPEN
2 Press to select
FUNCTION
Press until
FUNCTION
display.
on or off with 5/∞.
3 Select
Flap Auto
Pressing 5/∞ will switch
and off and that status will be displayed (e.g.,
).
Flap Auto :ON

Switching the auxiliary setting

It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using external equipment connected to this
unit.
1 Press to open the front panel.
OPEN
2 Press to select
FUNCTION
Press until
FUNCTION
play.
.
WARN
appears in the
WARN
between on
Warning
.
D OPEN
appears in the
D OPEN
between on
Flap Auto
.
AUX
appears in the dis-
AUX
on or off with 5/∞.
3 Select
AUX
Pressing 5/∞ will switch
off and that status will be displayed (e.g.,
).
AUX :ON

Switching the dimmer setting

To prevent the display from being too bright at
night, the display is automatically dimmed
when the car's headlights are turned on. You
can switch dimmer on or off.
1 Press to open the front panel.
OPEN
2 Press to select
FUNCTION
Press until
FUNCTION
play.
on or off with 5/∞.
3 Select
DIM
Pressing 5/∞ will switch
and off and that status will be displayed (e.g.,
).
Dimmer :ON

Selecting the brightness

You can select the display brightness. Initially
this mode is set to 12.
1 Press to open the front panel.
OPEN
2 Press to select
FUNCTION
Press until
FUNCTION
display.
3 Select the desired brightness with 2/3.
• The display shows –
0
between on and
AUX
.
DIM
appears in the dis-
DIM
between on
Dimmer
.
BRIGHT
appears in the
BRIGHT
.
15
En
Section
09
51