Using Dynamic Label; Displaying Dynamic Label; Storing And Recalling Dynamic Label - Pioneer DEH-P8400MP Manual De Operación

Section
Other Functions
10

Using dynamic label

Dynamic label provides character information
concerning the service component you're cur-
rently listening to. You can scroll the displayed
information.
Notes
• The tuner automatically memorizes the three
latest dynamic label received, replacing text
from the least recent reception with new text
when it is received.
• You can store data from up to six dynamic
label transmissions in buttons

Displaying dynamic label

1 Press to display dynamic label.
TEXT
• Press once more, or press the
TEXT
and the dynamic label mode is canceled.
• When no dynamic label is currently being
received,
NO TEXT
• If you press
TEXT
head unit has been closed, the front panel auto-
matically opens.
2 Press 2 or 3 to recall the three most
recent dynamic label.
Pressing 2 or 3 switches between the current
and the three dynamic label data displays.
• If there is no dynamic label data in memory
the display will not change.
3 Press ∞ to scroll the dynamic label.
• When viewing dynamic label, do not operate
until you have parked your car safely.
• If you press 5, you return to the first line.
• If you select the dynamic label mode again
after having canceled it, the information may
switch to the latest available.
58 En
.
1–6
BAND
is displayed.
while front panel of the

Storing and recalling dynamic label

You can store data from up to six dynamic label
transmissions at buttons
1 Display the dynamic label you want to
store in memory.
Refer to Displaying dynamic label on this page.
2 Press any of 1–6 and hold to store the
selected dynamic label.
The memory number will display and the
selected dynamic label has been stored in mem-
ory.
The next time you press the same
the dynamic label display the stored text is
recalled from memory.
,
.
1–6
button in
1–6