Silca Tri-Code Manual De Uso página 21

Operating manual - English
STOP 2
Turn the (F) knob to the left. Fit the key so that it lies flat on the clamp with the tip up against Stop 2 (to
do this the Stop 1 plate must be turned left and downwards).
Secure the key by turning the (F) knob to the right.
Fig. 18
• Clamp POSITION B
Fig. 19
STOP 0
Turn the (F) knob to the right. Fit the key so that it lies flat on the clamp with the tip up against Stop 0.
Secure the key by turning the (F) knob to the left.
STOP 2
Turn the (F) knob to the right. Fit the key so that it lies flat on the clamp with the tip up against Stop 2.
Secure the key by turning the (F) knob to the left.
Fig. 20
16 Copyright Silca 2006
TRI-CODE H.S.
F
F
F