Silca Tri-Code Manual De Uso página 37

Operating manual - English
Example for HONDA
• Press the key
It is not necessary to enter the full name, the first few letters are enough; the screen will automatically
show the name of the MAKE closest in alphabetical order;
• use the arrows
• Use the [CLEAR] key to delete the text entered.
• Press ENTER to continue; the display will show the message:
• To view further information about the SSNs found, hold down the key
Press ENTER to continue; the display will show the message:
Enter the new code to be cut.
• There are now two possible choices:
1) Proceed with [SHIFT+ENTER] to follow the complete flow and see the cutting data associated with
the code entered. The cutting data is already entered and corresponds to the code K001.
Use [down arrow key] to go on to Axis 2.
Press ENTER to continue; the display will show the message:
2) Proceed with [ENTER] to skip some of the data and get to the window preceding the start of the
cutting operation:
32
[right-hand arrow] to place the cursor next to the "Code=" field.
?
C o d e =
M F G =
= >
C o d e =
M F G = H
= > H O N D A
[ 0 2 ] L i s t = E N T E R
[up/down] to scroll the sequence of MAKES in alphabetical order.
M a r . : H O N D A
1 : K 0 0 1 - N 7 1 8 M a s t e r
2 : K 0 0 1 - N 7 1 8 V a l e t
I n s e r t t h e c o d e
=
( K 0 0 1 - N 7 1 8 )
I n s e r t t h e c o d e
= K 0 0 1
( K 0 0 1 - N 7 1 8 )
A x i s : 1 o f : 2
S i d e s : A B
2 3 2 1 3 1
( 1 2 3 4 5 6 )
A x i s : 2 o f : 2
S i d e s : A B
3 2 1 1 5 1
( 1 2 3 4 5 6 )
Copyright Silca 2006
[ 0 2 ]
[ E N T E R ]
[ E N T E R ]
[ 6 ]
[ 6 ]
TRI-CODE H.S.
[right-hand arrow].
?