Standard Equipment; Cables And Tools; Machine Assembly; Instructions For Installing Handle - RIDGID K-1500G Manual Del Usuario

K-1500G Drain Cleaning Machine

Standard Equipment

Machine Options
Catalog Model
No. No. Description
44587 K-1500G Machine Only with A-1 Glove, A-12
Coupling Pin Key and A-34-10 Rear
Guide Hose
48462 K-1500G Machine with Standard Equipment,
w/C-14 includes:
– Ten Sections Of C-14 Cable,
Total 150 Feet
– Three A-8 Cable Carriers
– A-1 Left-Hand Mitt
– A-12 Coupling Pin Key
– A-34-12 Rear Guide Hose
– A-2864 Hex Key
– A-3516 Hex Key
– A-3 Tool Box
– T-2 Heavy-Duty Straight Auger
– T-4 Heavy-Duty Funnel Auger
– T-6 Retrieving Auger
– T-8 Grease Cutter
– T-13 Sawtooth Cutter
– T-50 Sharktooth Cutter
Cables and Leaders
Catalog Model
No. No. Description
92280 C-11 15 Standard All-Purpose Wind,
Good for 4 Traps, 3 - 8 Lines.
62285 C-12 15 Extra-Heavy-Duty Wind,
4 - 10 Long Runs, No 4 Traps.
62295 C-14 15 Heavy-Duty Wind,
Through Cleanout, No 4 Traps.
62300 C-15 15 Extra-Flexible Wind,
Good for Traps.
63090 T-27 1 1 / x 25 Leader
4
62275 C-10 15 Standard All-Purpose Wind,
Requires A-368X Jaws and
NOTE! C-10 ( 7 / Dia.) cable should be used to clean 2 diameter
8
drains. Requires A-368X jawset and
4
3 / Pitch.
8
3 / Pitch.
8
1 / Pitch. 3 - 10 Lines
2
1 / Pitch. 3 - 6 Lines
2
7 / Tools
8
7 / tools.
8
Ridge Tool Company
Tools for C-11, C-12, C-14 and C-15 Cables 1
Catalog Model
No. No. Description
62840 T-1 Straight Auger
61800 T-2 Heavy-Duty Straight Auger
63105 T-3 Funnel Auger
61790 T-4 Heavy-Duty Funnel Auger
63190 T-5 Straight Retrieving Auger
63195 T-6 Funnel Retrieving Auger
63200 T-7 Hook Auger
63205 T-8 Grease Cutter, 2
63210 T-9 Grease Cutter, 3
62845 T-10 Grease Cutter, 4
59480 T-11 "H" Cutter, 2
59485 T-12 "H" Cutter, 3
61970 T-13 Sawtooth Cutter, 2
61975 T-14 Sawtooth Cutter, 3
61770 T-15A Expanding Cutter, 4 - 6
61825 T-15B Expanding Cutter, 6 - 8
61960 T-16 Spiral Bar Cutter, 4
61850 T-17 Spiral Bar Cutter, 6
61855 T-18 Spiral Bar Cutter, 8
59625 T-21 Spiral Sawtooth Cutter, 2
63075 T-22 Spiral Sawtooth Cutter, 3
63085 T-23 Spiral Sawtooth Cutter, 4
59765 T-24 4-Blade Cutter, 2
59770 T-25 4-Blade Cutter, 3
59775 T-26 4-Blade Cutter, 4
59780 T-26A 4-Blade Cutter, 5
98030 T-50 Three Blade, 3
98035 T-50-1 Sharktooth Cutter, 3
98040 T-50-2 Sharktooth Cutter, 4
98045 T-50-3 Sharktooth Cutter, 6
63110 T-31 Chain Knocker, 3
63115 T-32 Chain Knocker, 6 Pipe
63120 T-33 Chain Knocker, 8 Pipe
63145 T-38 Flue Brush, 1
63150 T-39 Flue Brush, 2
63155 T-40 Flue Brush, 2
63160 T-41 Flue Brush, 3
63165 T-42 Flue Brush, 3
63170 T-43 Flue Brush, 4
63175 T-44 Flue Brush, 4
63240 T-45 Flue Brush, 5
63180 T-46 Flue Brush, 5
63185 T-47 Flue Brush, 6
NOTE! See Ridge Tool Catalog for complete listing of
tools and accessories.

Machine Assembly

WARNING
To prevent serious injury, proper assembly of the
K-1500G Drain Cleaning Machine is required. The
following procedures should be followed:

Instructions for Installing Handle

1. Insert handle assembly into handle opening in base
and attach by means of four
(Figure 1).
1 /
4
1 /
2
1 /
2
1 /
2
1 /
2
1 /
2
1 /
2
1 /
2
1 /
2
1 /
2
1 /
2
1 /
2
1 /
2
4 5
4 Pipe
1 /
2
1 /
2
1 /
2
1 /
2
1 /
2
3 / bolts provided
8