Sony MEX-100NV Manual De Instrucciones página 41

Einbauanl_CD5_0.book Seite 39 Montag, 1. Juli 2002 2:38 14
If the unit is switched off during the calibration ride, lan-
guage installation is requested when the unit is switched on
again. Reinstallation can be skipped by pressing NAVI.
• Calibration has been completed successfully if the main navigation
menu is displayed.
• For correct navigation on routes with time-dependent traffic guid-
ance, the time should be set correctly as described under "System
settings" in the operation guide.
11. Service Mode
In Service Mode, various functions can be checked in detail and the cal-
ibration can be modified.
• Switch on the unit (see operation guide).
Enter code (see operation guide).
• If the unit has already been calibrated, select the main navigation
menu by pressing NAVI.
If the unit has not been calibrated, proceed as described in the next
point but one.
• Press NAVI again to access the system settings.
• Press and hold the
multifunction button. This calls up the Service Mode.
5
Subject to correction and technical modifications
multifunction buttons. Then press the
3
39
Installation guide
DEST. MEMORY
D E S T I N A T I O N
P.O.I.
DEST. MEMORY
D E S T I N A T I O N
P.O.I.
TIME/ALARM
S A V E P O S I T I O N
LANGUAGE*
Copyright by Becker GmbH, D-76303 Karlsbad