Sony MEX-100NV Manual De Instrucciones página 47

Einbauanl_CD5_0.book Seite 45 Montag, 1. Juli 2002 2:38 14
• Engage the reverse gear for the reverse signal function test.
The number after
• Drive round a bend to test the function of the internal sensors.
The values after
In order to quit the sensor test, press NAVI. The unit switches back to
the Service Mode.
Testing the voice ( SPEECH TEST
A test program is used to test the voice.
• In the Service Mode, select
control and press to confirm.
The announcement "Please insert Navigation CD" is given.
By pressing the SELECT control, the announcement can be repeat-
ed.
After completing the test, press NAVI. The unit switches back to
the Service Mode.
Subject to correction and technical modifications
should jump from to (
REV.: 0 1 1
and should change.
X: Y :
)
SPEECH TEST using the SELECT
45
Installation guide
to ).
0
SENSORS
S P E E C H T E S T
DEMO
Copyright by Becker GmbH, D-76303 Karlsbad