Epson SureColor S Serie Guía De Referencia Rápida página 17

Insert the left holder into the roll core. Slide the holder in until part
5.
inserted.
Tighten the roll core holder screw.
6.
Attach the media to the take-up roll core.
7.
You can take up the media either counterclockwise (printed
side out) or clockwise (printed side in).
Using the Auto Take-up Reel
in the illustration is fully
A
Caution: Stop when part A is no
longer visible. Do not push the
holder too far in.
Printed side out
Printed side in
|
15