Creating Media Configurations - Epson SureColor S Serie Guía De Referencia Rápida

|

Creating Media Configurations

20
•
Select these settings using the information supplied with your media:
Setting Name
Platen Gap
Heating & Drying
Head Movement
Roll Type
Media Tension
Note: The Heating & Drying setting is especially important, and includes several sub-settings.
•
Print a nozzle check pattern and clean the print head, if necessary. See page 23.
•
Perform an Auto Feed Adjustment. See page 21.
•
Perform an Auto Head Alignment. See page 21.
•
Select the Setting Name for the media and print.
Creating Media Configurations
Press the button.
Menu
1.
Select
Media Setup
2.
Select
Customize Settings
3.
Select the media bank setting number (1 to 30) you want to use for this media type and press
4.
Select the settings for your media.
5.
Feed Adjustment
Head Alignment
Media Suction
Multi-Strike Printing
Tension Measurement
Feed Speed
and press .
OK
and press
OK.
.
OK