Connecting A Parallel Cable - HP LaserJet 9040 Guía De Instalación Inicial

Connecting a parallel cable

Use a parallel cable if you want to connect the printer directly to a computer.
To ensure reliability, use an IEEE-1284 bidirectional B-type parallel cable. These cables are
clearly marked with "IEEE-1284." Only IEEE-1284 cables support all of the advanced printer
features.
16 Printer Setup
To connect a parallel cable
1 Make sure that the printer power cord is not connected to an outlet.
2 Connect the parallel cable to the printer parallel port. Press the
locking release levers while connecting the cable.
Note
If installing the cable is difficult, make sure you have the correct cable.
3 Connect the other end of the cable to the proper connector on the
computer.
ENWW