Configure The Control Panel Display Language - HP LaserJet 9040 Guía De Instalación Inicial

Step 10. Configure the control panel display language
By default, the control panel on the printer displays messages in English. If you did not set the
language in step 9, use the following procedure to set the printer to display messages and print
configuration pages in another supported language.
To configure the control panel language
1
2
3
4
5
6
7
8
9
Note For Turkish, Czech, Russian, Hungarian, and Polish, language selection will change the default
symbol set for the specific language. For all other languages, the default symbol set is PC-8.
20 Printer Setup
Turn off the printer.
Turn on the printer.
Wait until the printer begins counting memory.
Press and hold .
Continue to hold until all three control panel lights illuminate, and then release
Use or to scroll to Configure Device and press
Use or to scroll to System Setup and press
Use or to scroll to Language and press
Use or to scroll to your language and press
.
.
.
.
.
ENWW