Change The Control Panel Overlay - HP LaserJet 9040 Guía De Instalación Inicial

Step 8.

Change the control panel overlay

1
2
3
4
5
18 Printer Setup
The control panel comes with an English overlay installed. If necessary,
use the procedure below to change the control panel overlay to one
included in the box.
To change the overlay
1 Insert your fingernail or a thin, rigid object in back of the overlay and
lift up.
2 Gently lift the overlay up and backward to move it away from the
printer.
3 Position the new overlay over the control panel. Align the ends of
the overlay with the holes on the control panel and slide the overlay
in.
4 Snap the overlay firmly onto the control panel. Ensure that the
overlay is flat against the control panel.
ENWW