Prepare Printer Location; Shipping Box Space Requirements; Unpacking Space Requirements; Removing The Printer From The Shipping Box - HP LaserJet 9040 Guía De Instalación Inicial

Step 1.

Prepare printer location

Shipping box space requirements

Make sure that your building has a door or receiving area large enough for delivery of the
shipping box. The approximate dimensions of the shipping box are as follows:
911 x 790 mm deep x 1036 mm high (36 x 31 inches deep x 41 inches high).

Unpacking space requirements

Before removing the plastic wrapping from the shipping box, make sure that you have enough
space to remove the contents from the shipping box, and then lift the product off its shipping
pallet. HP recommends at least 3.1 meters (10 feet) of space around the shipping box to remove
all of the shipping materials.

Removing the printer from the shipping box

See the graphics on the shipping box for information about how to remove the printer from the
shipping box.
WARNING! The printer is heavy. HP recommends that four people move it to avoid injury to you and damage
to the printer.
ENWW Prepare printer location 5