Electrical Requirements; Grounding Instructions - Alliance Laundry Systems H264I Instalación Y Operación

Electrical Requirements . . .

(120 Volt, 60 Hertz with 3-Prong Grounding Plug)
NOTE: The wiring diagram is located in the control
cabinet.
WARNING
To reduce the risk of fire, electric shock,
serious injury or death, all wiring and
grounding MUST conform with the latest
edition of the National Electrical Code, ANSI/
NFPA No. 70, and such local regulations as
might apply. It is the customer's
responsibility to have the wiring and fuses
checked by a qualified electrician to make
sure the laundry room has adequate
electrical power to operate the washer.
DO NOT OVERLOAD CIRCUITS
DO NOT USE ADAPTER
DO NOT USE AN EXTENSION CORD

Grounding Instructions

The washer must be grounded. In the event of
malfunction or breakdown, grounding will reduce the
risk of electric shock by providing a path of least
resistance for electric current. The washer is equipped
with a cord having an equipment-grounding conductor
and a 3-prong grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
12
Improper connection of the equipment-
grounding conductor can result in a risk of
electric shock. Check with a qualified
electrician or serviceman if you are in doubt
as to whether the washer is properly
grounded.
Do not modify the plug provided with the washer — if it
will not fit the outlet, have a proper outlet installed by a
qualified electrician.
W227
NOTE: Have a qualified electrician check the polarity
of the wall receptacle. If a voltage reading is measured
other than that illustrated, the qualified electrician
should correct the problem.
D009IE1A
NEUTRAL
WARNING
STANDARD 120 VOLT, 60 HERTZ,
3-WIRE EFFECTIVELY GROUNDED CIRCUIT
L1
GROUND
120 ± 12
V.A.C.
ROUND
GROUNDING
PRONG
W216
NEUTRAL
SIDE
0
V.A.C.
120 ± 12
V.A.C.
D090IE1A
800138