Product Safety Information; Product Specifications - Ingersoll Rand 7P24L Especificaciones Del Producto

Product Safety Information

Intended use:
These Sanders and Polishers are designed for standard duty sanding and polishing operations.
● Failure to observe the following warnings, and to avoid these potentially hazardous
situations, could result in death or serious injury.
● Do not attempt to disassemble the Controller. The Controller is available only as a unit
and is guaranteed for the life of the tool if it is not abused.
For additional information refer to Product Safety Information Manual Form 04580387.
Manuals can be downloaded from ingersollrandproducts.com

Product Specifications

Free Speed
Model(s) Throttle
7S48L Lever
7S48L-EU Lever
7S60L Lever
7S60L-EU Lever
7P24L Lever
7P24L-EU Lever
7S30L Lever
7S30L-EU Lever
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
*K = Vibration measurement uncertainty
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.
03529385_ed13
WARNING
Spindle and Back
Up Pad
rpm
4800 5/8-11, 7"
4800 5/8-11, 7"
6000 5/8-11, 7"
6000 5/8-11, 7"
2400 5/8-11, 7"
2400 5/8-11, 7"
3000 5/8-11, 7"
3000 5/8-11, 7"
WARNING
Sound Level dB (A)
(ISO15744)
† Pressure (L ) ‡ Power (L
p
78.4 --
78.4 --
79.0 --
79.0 --
79.7 --
79.7 --
86.5 97.5
86.5 97.5
EN
Vibration (m/s²)
(ISO28927)
Level *K
)
w
<2.5 --
<2.5 --
<2.5 --
<2.5 --
<2.5 --
<2.5 --
2.6 1.6
2.6 1.6
EN-1