Safety Information Specific To The Welding Mask; Confined And Moist Spaces - Parkside PFDS 33 B4 Instrucciones De Funcionamiento Y De Seguridad

Danger due to electric arc
rays:
Arc rays can damage the eyes
and injure the skin. Wear a
hat and safety goggles. Wear
hearing protection and a closed,
high shirt collar. Wear welding
helmets and proper filter sizes.
Wear full personal protection.
Danger due to
electromagnetic fields:
Welding current produces
electromagnetic fields. Do not
use along with medical implants.
Never wrap the welding cables
around the body. Consolidate
welding cables.
z Safety information spe-
cific to the welding mask
Using a bright light source
„
(e.g. lighter) always check
the welding mask is working
properly before starting to weld.
Welding splashes can
„
damage the glass shield.
Replace damaged or scratched
glass shields immediately.
Promptly replace damaged
„
or heavily soiled or splashed
components.
The equipment may only be
„
operated by persons who have
turned 16.
Familiarise yourself with the
„
safety instructions for welding.
Also refer to the safety instruc-
tions of your welding device.
Always use the welding mask
„
when welding. Failure to use
the shield may result in serious
injuries to the retina.
Always wear protective clothing
„
when welding.
Never use the welding mask
„
without protective glass,
as the optics can otherwise be
damaged. There is a risk of
damage to the eyes.
Replace the protective glass
„
in good time to ensure good
visibility and fatigue-proof
working.
z Confined and moist spaces
When working in tight, moist
„
or hot spaces, use insulating
pads and intermediate layers
in addition to gauntlet gloves
made of leather or a different
insulating materials to insulate
the body from earth.
When using welding devices
„
in environments with increased
electrical risks, e.g. confined
spaces with electrically con-
ductive walls (boilers, pipes,
etc.), in wet rooms (sweating
Safety instructions
GB/MT 81