Programming Your Code(S) - SentrySafe Fire-Safe OA5835 Manual Del Usuario

Programming Your Code(s)

Programming information
1
NOTE: • Remember, once you have decided on your access codes, open the unit first then test it
with the door open.
• All zeros is an invalid code.
• To turn the beeper on or off, press the "0" key and then the "Prog/Enter>>" key.
Programming the manager code
ONLY 1 CODE CAN bE PROGRAMMED AT A TIME
1
2
Three code options:
Factory code: The safe will ALWAYS unlock using this 5 digit
code (found on the back of this owner's manual). This code
cannot be deleted.
Manager code: a 4-8 digit programmable code of your
choosing that can be changed or deleted.
Secondary code: If you wish to give someone else temporary
access to the safe, you can program a 4-8 digit secondary code
that can be changed or deleted.
To ADD a manager code:
A. Press the "Prog/Enter>>" key
B. Enter the 5 digit factory code and press "Prog/Enter>>" key.
C. An empty box icon ( ) means no manager code is currently
programmed. A box with a star (
is currently programmed.
D. Enter a 4-8 digit code and press "Prog/Enter>>" key to
finish programming the code into the unit.
To DELETE a manager code:
A. Press the "Prog/Enter>>" key, then enter the 5-digit factory
code and then press the "Prog/Enter>>" key.
B. A box with a star ( * ) indicates there is a code programmed
and can be deleted.
C. Enter 0, 0, 0, 0, 0 then the "Prog/Enter>>" key to delete the
manager code.
6
) means a manager code
*