Scope Of Delivery - Waeco MS-BE6 Instrucciones De Montaje Y Uso

MagicSpeed Accessory
Observe the following instructions when working with electrical parts:
When testing the voltage in electrical cables, only use a diode test lamp
(fig. 1 9 page 3) or a voltmeter (fig. 1 10, page 3).
Test lamps with an illuminant (fig. 1 11, page 3) consume voltages that
are too high and can damage the vehicle's electronic system.
When making electrical connections (fig. 3, page 3), ensure that:
– They are not kinked or twisted
– They do not rub on edges
– They are not laid in sharp-edged ducts without protection
Insulate all connections.
Protect the cables from mechanical wear (for example rubbing against
existing cables) using cable binders or insulating tape.
Please observe the following instructions in particular:
Observe the applicable legal regulations.
When driving, make sure no other road users can be injured.
MagicSpeed is designed as an additional aid; i.e., it does not relieve you
of the duty of taking due care when driving.
3

Scope of delivery

No. in
fig. 4, Quantity Description
page 4
1
2
1 Control lever
1 Plug housing
Scope of delivery
MS-BE6
27