Product Description; General Description; Assembly And Controls - Renfert Duomix II Instrucciones De Servicio

3. Product Description

3.1

General Description

The DUOMIX II unit for mixing impression materials facilitates extrusion and mixing of 2-component
dental impression materials.
5:1 cartridges or foil bags in cartridge holders from different manufacturers can be used in the unit.
Impression materials marked with the symbols
the relevant mixing programme in the DUOMIX II.
The mixing programs control the feed rate of the pressure discs and the rotational speed of the hexa-
gonal head.
Only mixing nozzels should be used which are designated to the impression material by the
manufacturer.
3.2 Assembly and
Controls
(1) fill level indicator
(2) "Impression tray" advance key (fast ex-
trusion speed)
(3) "Dispenser" advance key (slow extrusion
speed))
(4) Retract key
(5) Yellow LED, residual level indicator
(6) Green LED, unit ON
(7) Red LED, unit cover open
(8) unit cover.
(9) pressure discs
(10) spindle covers
(8)
(12)
(13)
Fig. 1
(11)
(10)
(9)
(14)
(15)
or can be extruded in double the speed with
(11) spindles
(12) Catch
(13) hexagonal end
(14) cartridge bed
(15) Control keys and LED display for
mixing programs
(7) (6)
(16) Mains switch
(5)
(17) Fuse
(18) Mains connection
(4)
(19) Power cord
(20) cartridge / cartridge with tubular bag
(3)
(21) mixing nozzle
(22) Service connection (only for interior
(2)
utilization at Renfert)
- 5 -
(1)
(22)
(18)
(17)
(16)
(19)
(20)
(21)
EN