Product Assembly Rules - Festo CPX-FVDA-P Serie Descripción Resumida

CPX-FVDA-P...
In addition, the module connection technology provides the unconnected voltage
U as an operating voltage (auxiliary supply) for external components (24 V).
VAL
The output module CPX-FVDA-P is a product with functions relevant for safety and
is designed for installation in machines or automated equipment to be used as
follows:
– in faultless technical condition.
– without any modifications by the user.
– exclusively in conjunction with the CPX terminal components specified here
(see also www.festo.com/catalogue)
– within the product limits defined by the technical data (see chapter 6)
– in industrial applications
Note that the safe system limits of the output module are the same as its physical
limits.
Note
In the event of damage caused by unauthorised manipulation or use other than
that intended, the guarantee is invalidated and the manufacturer is not liable
for damages.
The functionality of the safety equipment must be checked at appropriate inter-
vals. The operator is responsible for selecting the nature of the checks and the
intervals in the specified period. The check should be carried out in such a way as
to demonstrate faultless functioning of the safety equipment in its interaction with
all components.

Product assembly rules

– The output module CPX-FVDA-P may only be used in the standard version of
the CPX terminal from Festo.
– Operation is only permitted in conjunction with the following PROFIsafe com-
patible CPX bus nodes, with revision code Rev 18 or later (see bus node rating
plate):
– CPX-FB33 (network protocol PROFINET IO)
– CPX-FB34 (network protocol PROFINET IO) or
– CPX-FB35 (network protocol PROFINET IO)
Festo CPX-FVDA-P... 1011NH English
21