11
Center the tubing connector in
the recess in the pump housing.
Make sure that the membrane
cap engages and lies flush to
the surface.
Warning
Refer to pump instructions for use for
important safeguards and operating
information.
15
If let-down occurs before the
Expression Phase begins, press
the let-down button to begin the
Expression Phase.*
Questions? Visit www.medela.com or call us at 1-800-435-8316.
12
Close the lid.
Note
• For step 12:
Always close the lid when pumping.
The lid keeps the membrane cap
pushed down to prevent a loss
of vacuum that could occur if the
membrane cap came off.
16
When your pumping session is
over, store your breast milk and
clean your kit. See sections 3-6
for cleaning instructions. Refer to
section 9 for storage guidelines.
19