Lactina - Medela Symphony & Lactina Instrucciones De Uso

7. Assembly of the Pump Kit (cont.)
Tip
T
Carry out all steps with care and
assemble the pump kit correctly for
optimum performance.
Parts Needed:
• Tubing

• Lactina

pump
®
• Breast shields
• Breast milk bottles/containers
• Lids
• Connectors
• Yellow valve heads
• White membranes
• Piston
• Cylinder
• Pump Connector
Note
• Use Authentic Medela Spare Parts only.
See page 5 for details.
• Check pump kit components for wear
or damage before use and replace if
necessary.
• All components must be completely dry
before use for proper performance and
to prevent damage to the pump.
20
7B. Lactina
®
1
Caution
Wash hands thoroughly with soap
and water before touching breast
pump, kit and breasts, avoid touching
the inside of containers or lids.
4
Attach pump connector to
Lactina, and rotate cylinder
down into position.
7
Snap white membranes onto
yellow valve heads until white
membranes lie flat.