Last Number Redial; Flash - Clarity W1000 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

You must switch the tone/pulse switch on
the top edge of the phone to tone before
responding to these prompts. In summary,
dial the phone number you want to call
in pulse mode, switch to tone mode to
interact with the automated answering
system, switch back to pulse mode when
your call is done. When switching from
Pulse to Tone during a call, there will be
a 3 second delay from the time you first
push a key in tone mode until the key
press is transmitted.
Important: You must have tone signaling
service to use the TONE feature on the
Clarity telephone. If in doubt, contact your
local telephone company.
➤ To Set the
TONE/PULSE Switch:
1. Move the switch towards the correct
setting.
2. Depress the hookswitch once.
3. The phone will now dial in the mode you
selected.

➤ Last Number Redial

Last Number Redial allows you to auto-
matically redial the last telephone number
you called. This feature is convenient for
14
CLARITY W1000 FEATURES
redialing numbers which are busy. The
phone number stored for redial will be
reset with every new call you make.
➤ To Operate
Last Number Redial:
1. Depress the hookswitch to get a new
dial tone.
2. Press the "Redial" Button once.
3. Stay on the line, and your call will
be dialed.
The last number dialed will be stored in
the Clarity telephone for you until you dial
another number.

➤ Flash

Flash is a special feature that is required
to use some calling services provided by
your local phone company, such as call
waiting. Consult your guide to these ser-
vices which is available from your local
phone company. Flash serves the same
purpose as pressing and releasing the
hook switch very quickly.
CLARITY W1000

Publicidad

Tabla de contenido
loading

Tabla de contenido