Shortening The Tungsten Electrode - Abicor Binzel ABITIG Little Serie Instructivo De Servicio

®
ABITIG Little
1 Torch body
2 Electrode holder
Abb. 2 Torches ABITIG
1 Torch body
2 Electrode holder
Abb. 3 Torches ABITIG

4.2 Shortening the tungsten electrode

1
2
Step 1
3 Torch cap
4 Tungsten electrode
®
Little 150, 260W
1
2
Step 1
3 Torch cap
4 Tungsten electrode
®
Little 90, 180W
NOTE
• It is also possible to use a gas diffuser instead of the electrode collet.
Owing to its design, it will produce a laminar gas flow.
The electrode type is set by EN ISO 6848. The max. length of electrode
depends on the type of torch.
NOTE
• The welding performance is affected by the selection of the tungsten
electrode and by wear. A smooth, groove-free sharpened end of the
tungsten electrode has a positive effect on the welding result.
 8 Maintenance and cleaning on page EN-12
3 4
Step 2 Step 3
5
3 4
Step 2 Step 3
5
4 Putting into operation
5
Gas nozzle
5
Gas nozzle
EN - 9