Hoover VISION HOZP9177BI Instrucciones De Uso página 11

4. Oven enrollment
For all the details related to the link between app and product, available
also online at the following link: http://go.candy-group.com/hoover-ov
Wifi icon is managed the following way:
• when WiFi is off the icon is off
• after a reset the icons blinks 1 seconds on and 1 seconds off and the
oven starts a new enrollment. There is a time slot of 5 minutes to
complete the enrolment starting from when user presses ok button on
standard or easy enrollment. Elapsed this time the WiFi is switched off
wifi icon disappears.
• if the oven is connected to a router the icon is switched on fix oven is
only controlled by remote.
TFT shows following image:
• when the oven is in read only mode the icon blinks 1
seconds off.
Figure 8
NOTE: Press smartphone icon to go to READ ONLY MODE.
READ ONLY MODE
You can read oven status related to temperature cooking duration and
program.
BLINKING
BEHAVIOUR
oven is enrolling please follow quick guide for details on procedure
1s on 1s off
oven is in read only mode
1s on 3s off
oven is enrolled but has lost connection with router. It is not
3s on 1s off possible to send remotee control command. Please check your
router connection
oven is not enrolled. You can only start a new enrollment.
always off
WIRELESS PARAMETERS
Specifications
Parameter
Wireless Standart
802.11 b/g/n
Frequency Range
2,4 12 GHz. – 2,4
802.11b
+1 9.5 dBm
802.11b
Max Transmit Power +1 8.5 dBm
802.11 g. OFDM 54
+1 8.5 dBm
802.11n. MCS7=
+1 dBm 4
802.11b =1024 bytes,
-80 dBm
802.11g =1024 bytes,
-70 dBm
Minimum Receiving
Sensivity
802.11n =1024 bytes,
-65 dBm
802.11n HT40 =1024 bytes,
-65 dBm
(Figure 8)
seconds
,
MEANING
Specifications
(Wi-Fi) (Bluetooth)
Bluetooth v4.2
84 GHz 2,4 12 GHz. – 2,4
. DSSS 1 Mbps =
Basic data rate:
RF Transmit Power (Typ):
+4 dBm
. CCK 1 1 Mbps =
Enhanced data rate:
RF Transmit Power (Typ):
Mbps =
+2 dBm
BLE:
RF Transmit Power (Typ):
+7.5 dBm
Basic data rate:
Sensivity@ 0.1% BER:
-98 dBm
Enhanced data rate:
Sensivity@ 001% BER:
-98 dBm
BLE:
Sensivity@ 0.1% BER:
-98 dBm
Product information for networked equipment
Power consumption of the product in
networked standby if all wired network
ports are connected and all wireless
network ports are activated:
How to activate wireless network port:
on and 3
How to deactivate wireless network
port:
Quick Guide Hoover OVEN -Enrollment on App
Procedure for devices with Bluetooth 4.0 (or higher)
This quick guide illustrates the steps to follow to enroll your appliance
on the App Hoover Wizard, using a device with Bluetooth 4.0 (or
higher) technology. In this case, the procedure is simplified and faster
(Easy Enrollment).
If you are using a device without Bluetooth technology (or less than
4.0), please follow the instructions described in the next section.
STEP 1
· Mark down the appliance Serial Number.
· Mark down the Wi-Fi Name and Password (WPA/WEP Key) which
are normally placed on the back of your Wi-Fi router.
NOTES
- The frequency of the home Wi-Fi network has to be set on the 2.4
GHz band. You cannot configure the appliance if your home network
is set to the 5 GHz band.
- If you are having trouble locating the WPA/WEP Password, please
contact your Internet Provider. Please make sure your smartphone is
connected to the same Wi-Fi network and has the Bluetooth enabled
within the "Settings". Refer to the manual for more details.
STEP 2
· Download the Hoover Wizard App from the Store.
· Open the Hoover Wizard App and create your user profile by taping
on "Register".
· Accept the privacy policy and fill in the required fields.
NOTES
-The App is available for Android (version 4.4 or higher) and iOS
84 GHz (version 8.0 or higher) devices.
-If you already have a Hoover Wizard user profile, you can login using
your credentials.
STEP 3
In the homepage, tap on the icon with the three bars on the top left to
enter your profile, then tap on "REGISTER NEW APPLIANCE" and
select the name of the product that you want to enroll.
STEP 4
· Insert the purchase date of your appliance
· (DD/MM/YYYY), then tap on "Proceed".
STEP 5
· Insert the 16 digits of the serial number or scan the QR code on the
appliance.
· Tap on "Next".
· Check data correctness of the data and tap on "Confirm". Once the
system has recognized the product, tap on "Next".
STEP 6
· Tap on the icon
· Press and hold the One-Fi icon for 3 seconds
· Click the "OK" of Easy Enrollment
In App - Tap on "Confirm". Wait for APP to connect to the appliance.
NOTES
- Enrollment must be completed within 5 minutes.
- In case of any issue, tap "Retry", making sure you have enabled
Bluetooth on your device (smartphone / tablet). If the process has not
been completed correctly yet, tap on "Proceed with Standard
Enrollment".
EN 11
2,0 W
Navigate to settings -> ONE-FI ->
press for 3 seconds the ONE-FI icon
Display shows 2 possible ways to
enroll the oven: standard and easy
Press the ok button on one of them.
WiFi module is switched on and
WiFi icon blinks 1s on 1s off.
Navigate to settings -> ONE-FI ->
press for 3seconds the ONE-FI icon
Display shows 2 possible ways to
enroll the oven: standard and easy
Do not press the ok button.
WiFi module is switched off and
WiFi is not shown.
Note: WiFi data if present are
deleted.
ON