Sauder 423410 Manual Del Usuario página 15

Step 11
Fasten two PIVOT HINGES (25H) to two DOORS (K). Use
å
two BROWN 7/16" LARGE HEAD SCREWS (6S).
Fasten two STRIKE PLATES (6I) to two DOORS (K). Use
å
two BLACK 1/2" FLAT HEAD SCREWS (11S).
NOTE: The remaining door will be the center DOOR. The
å
center DOOR as shown in Step 14 can be opened to the
right or the left. At that time you will follow the specifi c
steps based on your preference.
BROWN 7/16" LARGE HEAD SCREW
25H
www.sauder.com/service
IMPORTANT: Only fasten one PIVOT
HINGE to each DOOR in this step.
6S
LEFT
K
DOOR
RIGHT
K
DOOR
6I
423410
BROWN 7/16" LARGE HEAD SCREW
(2 used in this step)
BLACK 1/2" FLAT HEAD SCREW
(2 used in this step)
Indented holes
6S
25H
11S
Page 15