Publicidad
Step 12
Carefully stand your unit upright.
å
Insert a PIVOT HINGE (25H) into a WASHER (9I) and into the BOTTOM (G).
å
Insert the PIVOT HINGE, which is fastened to the left DOOR (K), into the hole in the SHELF (F). You will need to tilt
å
your DOOR slightly.
Now, tip the DOOR in and fasten the free HINGE to the left DOOR. Use a BROWN 7/16" LARGE HEAD SCREW (6S).
å
NOTE: To make adjustments to the DOOR, loosen the SCREW in the HINGE, make needed adjustments, and tighten
å
the SCREW.
Repeat this step for the right DOOR (K).
å
LEFT
K
DOOR
25H
BROWN 7/16" LARGE HEAD SCREW
Page 16
9I
6S
(2 used in this step)
F
G
RIGHT
K
DOOR
423410
25H
9I
www.sauder.com/service
Publicidad
