Publicidad
Step 16
Insert a PIVOT HINGE (25H) into a WASHER (9I) and into
å
the BOTTOM (G).
Insert the PIVOT HINGE, which is fastened to the
å
DOOR (K), into the hole in the SHELF (F). You will need
to tilt your DOOR slightly.
Now, tip the DOOR (K) in and fasten the free HINGE to the
å
DOOR. Use a BROWN 7/16" LARGE HEAD SCREW (6S).
NOTE: To make adjustments to the DOOR, loosen the
å
SCREW in the HINGE, make needed adjustments, and
tighten the SCREW.
BROWN 7/16" LARGE HEAD SCREW
Page 20
6S
(1 used in this step)
F
G
25H
9I
423410
Center Door opening right
K
www.sauder.com/service
Publicidad
