Specifications; Oximeter Specifications; System Specifications - Nonin WristOx2 Manual Del Operador

Technical Information

Specifications

Oximeter Specifications

Oxygen Saturation Display Range:
Pulse Rate Display Range:
Displays:
Accuracy – Sensors:
Measurement Wavelengths and Output Power
a.This information is especially useful for clinicians performing photodynamic therapy.

System Specifications

Temperature:
Time (from storage) for monitor to be ready for its
Device temperature will not exceed 41°C as measured during a controlled environment test.
Humidity:
Operating Altitude:
Operating Hyperbaric Pressure:
0 to 100 % SpO
18 to 321 beats per minute (BPM)
Numeric: 3-digit LCD
Pulse Strength: Pulse Strength Bar Graph
Declared accuracy data for compatible sensors can be
found in Nonin's Sensor Accuracy document.
a
:
Red: 660 nanometers @ 0.8 mW max. avg.
Infrared: 910 nanometers @ 1.2 mW max. avg.
Operating: -5 °C to 40 °C (23 °F to 104 °F)
Storage/Transportation: -40 °C to 70 °C (40 °F to 158 °F)
intended use:
Operating: 10 % to 95 % noncondensing
Storage/Transportation: 10 % to 95 % noncondensing
2
10 minutes to warm from -40 °C to -5 °C
10 minutes to cool from 70 °C to 40 °C
Up to 4,000 meters (13,123 feet)
Up to 4 atmospheres
43