jbc advanced AM 6500 Serie Manual De Instrucciones página 17

ENGLISH
ADVANCED HANDPIECES RANGE
All the Advanced soldering handpieces range
can be connected to the AM 6500 station.
The station AM 6500 includes the following
products:
- 2245 handpiece ref. 2245000 with the 2245-
003 cartridge Ref. 2245003. Power: 50W. For
general soldering work.
- AD 8245 soldering iron stand ref. 0788245.
- Set of accessories ref. 0780593 with 2245-007
cartridge Ref. 2245007. It can be chosen from
a wide range of different 2245 cartridges to
adapt perfectly to the needs of the job (pag.
96).
The following soldering handpiece can be
connected to the AM 6500 station:
- 2210/2225 handpiece ref. 2210000. Power:
20W. For high precision work, SMD etc.
Available 2210 cartridges: see page 98.
The 2210/2225 handpiece has to be connected
to the AD 8210 stand which has been especially
designed for this handpiece.
AD 8210
soldering iron stand
Ref.0788210
2210/2225 handpiece Ref. 2210000
2210 cartridges
16
One version of soldering iron handpiece
covered with a heat insulator is available:
- 2245 Confort handpiece ref. 2245110.
These articles are not delivered with the station.
The 2210 and 2245 handpieces and cartridges
comply with the MIL-SPEC-2000 referring to the
potential difference between the soldering tip
and ground connection, must be less than 2 mV.
For a soldering handpiece to work properly, the
following components are required: a control unit,
a handpiece and the corresponding stand and
cartridge.
The 2245 soldering iron is connected to the station
in the following way:
The cable connection of the 2245 soldering iron is
connected to the plug in the AD 8245 soldering
iron stand and the cable connection of the
soldering iron stand can be connected to any of
the two connectors at the back of the station.
Please find the connection plan on figure.
Connector
2245 handpiece Ref. 2245000
AD 8245
soldering iron stand
Ref.0788245
2245 cartridges