jbc advanced AM 6500 Serie Manual De Instrucciones página 9

ENGLISH
2210/2225 handpiece ref. 2210000 for great
precision tasks, like SMD solders, etc.
2245 handpiece ref. 2245000 for general
soldering tasks in professional electronics.
These soldering irons have a wide range of
cartridges with different models of tips. The
2245-009 cartridge and 2245-010 are
specially designed for soldering SMD circuits
of the QFP and PLCC types.
Solder wire with a diameter of between 0.5 and
0.7 mm should be used.
6 Depending on the nature of the component to
be soldered, use soldering paste together
with our TE 5000 hot air station, which gives
very accurate air-flow regulation, between 4
and 11 l/min.
MAINTENANCE
Exchanging the heater.
Turn off the station.
Use a wrench to unscrew the cover.
Move back the cover. Pull the connector from the
socket to disconnect the heater from the station.
O-ring ø17 x ø1,8
Follow this process inverted to re-connect the
heater.
8