Sequential Trip - Stanley BOSTITCH N58 Especificacion Técnicas

TOOLS WITH A SAFETY TRIP- THREE OPERATING TYPES POSSIBLE.
© Stanley Bostitch
All tools with a safety trip are marked with an inverted equilateral triangle (▼). Do not attempt to use a tool marked in this
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
way if the safety trip is missing or appears damaged.
compliance for the products.

SEQUENTIAL TRIP

(Reference 2 in Technical Data Table, column L)
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en
The sequential trip requires the operator to hold the tool against the work with the safety trip depressed
rien que les produits soient conformes aux normes CE.
before pulling the trigger. In order to drive additional fasteners, the trigger must be released and the tool
lifted away from the work, before repeating the above mentioned steps. This makes accurate fastener
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht
placement easier, for instance on framing, toe nailing and crating applications. The sequential trip
die CE-Richtlinien für Produkte.
GREY TRIGGER
allows exact fastener location without the possibility of driving a second fastener on recoil, as described
under Contact Trip (below). The sequential trip tool has a positive safety advantage because it will not
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
accidentally drive a fastener if the tool is contacted against the work - or anything else - while the operator is holding the
zeggen dat de producten voldoen aan de CE-vereisten.
trigger pulled.
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
CONTACT TRIP (N89C-1: SERIAL NUMBER 07315XXX ONWARDS)
produkterne.
(Reference 1 in Technical Data Table, column L)
The common operating procedure on "Contact Trip" tools is for the operator to actuate the safety trip
while keeping the trigger pulled, thus driving a fastener each time the work is contacted. This will allow
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
rapid fastener placement on many jobs, such as sheathing, decking and pallet assembly. All pneumatic
yhdenmukaisuutta.
tools are subject to recoil when driving fasteners. The tool may bounce, releasing the safety trip and if
unintentionally allowed to re-contact the work surface with the trigger still actuated (finger still holding
BLACK TRIGGER
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα αντίγραφα του παρόντος
the trigger pulled) an unwanted second fastener will be driven.
εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
These tools are labeled with a "do not use on stairs or ladders" symbol. Technical Data Table Illustration. Tools marked with
this symbol must not be used where changing from one working position to another involves the use of ladders, stairs or
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
similar structures such as roof laths.
conformità CE per i relativi prodotti.
CONTINUOUS CONTACT OPERATION.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for CE-
(Reference 4 in Technical Data Table, column L)
merking for produktet.
The Continuous Contact Operation Tools allow driving cycles to be repeated for as long as the trigger and the safety trip
remain actuated.
These tools may only be used where the length of the fastener does not exceed 65 mm. and they are also labeled with a "do
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
not use on stairs or ladders" symbol. See Technical Data Table Illustration. Tools marked with this symbol must not be used
conformidade com a CE para os produtos.
where changing from one working position to another involves the use of ladders, stairs or similar structures such as roof
laths.
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
DIRECTIONAL EXHAUST DEFLECTOR (FIG. 4: N64-084, N64-099, N89C)
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
The adjustable exhaust deflector can be rotated to any desired position by hand without the use of any tools.
conformidad con las normas CE de los productos.
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie FASTENER DEPTH CONTROL ADJUSTMENT (FIG 5)
stanowią deklaracji zgodności CE prezentowanych produktów.
The Fastener Depth Control Adjustment feature provides control of the nail drive depth from flush with or just above the work
surface to shallow or deep countersink.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
Warning! Disconnect tool from air supply before attempting any parts disassembly and before changing the work contacting
stanowią deklaracji zgodności CE prezentowanych produktów.
element adjustment.
1. Push in Locking Button
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
2. Adjust contact arm up to increase depth of drive or down to decrease it.
výrobky.
3. Release locking button.
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem jelenti
UTILITY HOOK (N89C-2- Fig 6)
a termék CE-megfelelőségét.
These tools include an additional utility hook suitable for storage and temporary hanging of the tool.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
WARNING! Never use the utility hook to hang the tool from the body, clothing or belt.
conformitatea CE pentru produse.
WARNING! Never use the utility hook with contact (black) trigger operated tools.