Install The Handles - Kohler K-T16237 Guia De Instalacion

Setscrew
Plug Button
Plug Button
Setscrew
Stem Extension

4. Install the Handles

Apply a bead of plumbers putty or other sealant around the
bottom of each adapter according to the sealant manufacturer's
instructions.
Thread an adapter onto each valve.
Install a stem extension onto each valve, then securely tighten
with a screw.
NOTE: For lever handle assemblies: The lever handle must point
away from the spout when in the closed position.
Position each handle assembly with the setscrew hole away from
the user (as shown), then slide each handle assembly over each
valve.
Tighten each handle assembly with a setscrew, then cover each
setscrew with a plug button.
Remove any excess plumbers putty or sealant.
1054538-2-C
Cross Handle Assembly
Lever Handle Assembly
Screw
Adapter
Valve
6 Kohler Co.