Foreseeable Misuse; Other Applicable Documents - Kübler Sendix 58 FS2 Serie Manual De Instrucciones

The encoder supports functions based on speed and rotation
direction information, e.g. in industrial processes or controls.
As a sensor, the safe encoder supports safety functions re-
garding speed and rotation direction. The encoder is not able
to achieve on its own a safe state in the safety function.
Dangerous situations must be detected and evaluated by a
superordinate controller.
They can i addition be used at locations where inflammable
mixtures can develop, see chapter
Explosion protection [} 41].
The measuring system and its evaluation unit must meet the
requirements mentioned in chapter Technical Data [} 42].

2.6 Foreseeable Misuse

The measuring system is not suitable for the following uses:
• Under water.
• In publicly accessible areas.
• As a standalone, independent safety system.
• Outside of the specifications stated in the data sheet..
• In areas where more serious EMC events may occur than
those defined in the standard.
36 - EN

2.7 Other Applicable Documents

Reference to the data sheet
All technical data, as well as the mechanical and electrical
characteristics, are specified in the data sheets of the corres-
ponding device variant, for special versions in the.corres-
ponding customer drawing of the product.
The above mentioned documents, the original declarations of
conformity and the relevant certificates can be downloaded
from our homepage:
www.kuebler.com/docufinder
For the evaluation of the safe sensor, observe the respective
operation manual of the system to be commissioned. The
evaluation unit or control must comply with the requirements
of the interface description and with the safety-related tech-
nical specifications.
BA Sendix® 58xxFS2 / 58xxFS3 - R60049.0009 - 05
NOTICE
.