Festo MTR−DCI Manual Del Usario página 21

Menu Command
Diagnostic
Pos.set table
Axis param
System param
SW information
1) 2)
Positioning
Move pos. set
Demo pos. table
Homing
1) 2)
Settings
Axis type yp
Axis param p
Festo P.BE−K−MTR−DCI 0606
Description
Display the system data and the currently effective
settings
Display the position set table
Display axis parameters and data
Display system parameters and data
Display the operating system version (firmware)
Reference travel and positioning travel for testing
the positionsets
Start positioning travel Position set"
Start positioning travel Position set table"
Start reference travel
Select the drive, parametrizing, programming the
position sets
Type DMES−...
Rotation drive
User config
Zero point
Abs.min.pos
Abs.max.pos
Save...
a
English
Festo linear axis type DMES−...
Rotation axis with stop
Any linear drive
Offset of axis zero point
Stroke limitation: Software end
position, neg.
Stroke limitation: Software end
position, pos.
Save parameter in EEPROM
21