Final Steps - KTM Power Parts 62014949000 Manual Del Usuario

16
17
8
Properly route all cables and secure them with cable ties.
Ensure that the cables can be neither kinked nor pinched.
Check the routed cables to ensure that there is no chafing.

Final steps

- Mount the fuel tank.
-
-
-
-
-
18
-
19
-
- Check that the fuel tank is firmly seated.
- Check the routing of the fuel hoses.
- Mount the lamp mask (see the Owner's Manual).
9 - Mount the seat (see the Owner's Manual).
Check that the tail light is functioning properly (brake light).
Position the fuel tank and raise at the front.
Connect the plug-in connection (16) of the fuel tank sensor.
Connect the plug-in connection (17) of the fuel pump.
Connect the fuel hose connection (18) with the new O-ring.
Lower the fuel tank at the front.
Connect the fuel hose connection (19) with the new O-ring.
Mount and tighten the screw (9) with the rubber bushing and
bearing sleeve.