Monitoring Using A Handset; Video Monitor Using A Handset - Panasonic KX-THA13 Manual De Instrucciones

Monitoring using a Handset

Video monitor using a
handset
This feature allows the handset to monitor
the image and sound of the room where
the cordless camera is located. The
monitored camera does not ring, allowing
you to easily monitor a baby's room, for
example, from different areas of the
house.
You can monitor the room when:
– you access the cordless camera using
the handset ("Monitoring the room
Y p j", page 16).
– the cordless camera pages the handset
when it detects motion and/or sound
("Cordless camera sensor Y p j",
page 17).
– the cordless camera user pages the
handset using the call button ("Cordless
camera call button Y p j", page 19).
Important:
L For information of the cordless camera
location, see page 9.
L Before you start monitoring, confirm that
the camera lens of the cordless camera
has been adjusted to the correct angle.
L Only 1 person can access the cordless
camera at a time.
L The model No. for the compatible
Panasonic units are the followings:
– KX-THA12: cordless video camera
handset
– KX-THA16: cordless video camera
station
16
For assistance, please visit http://www.panasonic.com/phonehelp
– KX-THA17: cordless video camera
handset with A/V output
Monitoring the room
KX-THA12/KX-THA17:
1
{MENU} (F2) i H i {SELECT}
2
"Camera & Audio" i {SELECT}
3
Select the desired unit. i {SELECT}
L To start/finish talking with the other
party, press {2WAY}.
4
Press {OFF} to stop monitoring.
KX-THA16:
1
{MONITOR} (F5)
2
"Camera & Audio" i {SELECT}
3
Select the desired unit. i {SELECT}
L To start/finish talking with the other
party, press {2WAY}.
4
Press {OFF} to stop monitoring.
Note:
L Once the handset user presses {2WAY}
in step 3, the cordless camera user can
talk with the handset user. Speak clearly
into the MIC on the cordless camera.
L You can page the handset by pressing
{Call button} while the handset is
monitoring the cordless camera
regardless of the cordless camera
detection mode setting.
L When {Call button} is pressed while
monitoring with the handset, {2WAY}
flashes on the display to notify you that
the cordless camera is paging you.
Press {2WAY} to answer the page.
Adjusting receiver/speaker volume
Press {^} or {V} while monitoring.
p j
Y