Panasonic KX-THA13 Manual De Instrucciones página 28

Monitoring using your Computer
Answering the detecting notification
with your computer
1
Cordless camera:
The cordless camera detects motion
and/or sound.
L The cordless camera produces a
camera tone and takes pictures.
L The cordless camera notifies your
computer with a paging tone if you
turn the paging tone on for pop-up
messages (page 27).
2
Your computer:
When the cordless camera notifies your
computer, the pop-up message is
displayed.
To monitor the cordless camera, click
[Connect].
L You can view the room where the
cordless camera is located.
3
Your computer:
Close the web browser to stop
monitoring.
Note:
L The cordless camera can store the last
50 images from the most recent images
to the oldest. When the 51st image is
stored, the oldest image is automatically
erased (default, page 33). The number
of images the cordless camera can store
may decrease depending on memory
size, sharpness, etc. You can save the
desired images into your computer
before images are erased.
28
For assistance, please visit http://www.panasonic.com/phonehelp
Viewing and saving images from the
cordless camera into the computer
1
Access the cordless camera (page 26).
2
Click [Stored Images] tab at the top of
the page.
L You can view the images by clicking
[First], [<Prev], [Play], [Next>], or
[Last].
3
To save the desired image, follow the
instructions on the web browser.
Erasing all images in the cordless
camera
1
Access the cordless camera (page 26).
2
Click [Setup] tab at the top of the page.
3
Click [Sensor Options].
4
Click [Erase All Images].