Cycle Segment Charts - Alliance Laundry Systems S Serie Instrucciones De Funcionamiento Y Programacion

Programming

Cycle Segment Charts

Display
PrE
PrEU or FLUS
00 or 02 to 30
HFIL, CFIL, or bFIL Select "HFIL" (hot fill), "CFIL" (cold fill), or "bFIL" (warm fill)
LOLE or HILE
SUP0–SUP7
00°F, 75°F–200°F
00°C, 25°C–93°C
SPIn (flashed for one second)
tInE (flashed for one second)
00 or 30 to 120
*Supply 4 and Supply 7 are available only if Supply 4 is enabled in the SETUP options.
**This is displayed only if auxiliary heat is enabled in the SETUP options.
26
Segment 1 (Prewash)
Use the Up or Down key to change. Press the Start key to enter or advance.
Select either "PREU" (regular prewash) or "FLUS" (flush)
Select segment time: 02 to 30 minutes (00 to skip segment)
Select fill level: "LOLE" (low), or "HILE" (high) water level
Select supply 0–7 (0 for no supply)*
Select temperature: 75 to 200°F or 25 to 93°C (00 for no heat)**
Select time for spin: 30 to 120 seconds (00 for no spin)
Instructions
F232087