DISC SANDER PTSG 140 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The disc sander is designed for sanding a wide
range of wood types. It can be used for the preci-
sion sanding of softwoods and hardwoods.
The appliance is not intended for commercial use.
Any other uses or modification of the appliance is
deemed to be improper use and carries the risk of
serious personal injury. The manufacturer accepts
no responsibility for damage(s) attributable to
misuse.
Depicted components
Sanding disc
Mains plug
On/Off switch
Speed control
Screw clamp mounting
Angle scale
Rotary knob
Plain washer
Hex socket screw
Sanding table holder
Sanding table
Table groove
Extraction nozzle
Adapter
Reducer piece
Screw clamp
Angle stop bolt
Angle stop angle scale
Guide rail
Sandpaper
Hex key
Storage covers
│
GB │ IE
■
12
Package contents
1 disc sander
1 angle stop
1 screw clamp
1 adapter
1 reducer piece
2 sanding paper sheets, 80 grain
2 sanding paper sheets, 150 grain
2 sanding paper sheets, 240 grain
6 storage covers
1 Hex key
1 set of operating instructions
Technical data
Rated voltage:
Rated power
consumption:
Protection class:
Protection Class:
Rated idle speed:
Weight:
Ø sanding disc:
Sanding table dimensions: 140 x 98 mm
Noise emission value:
Noise measurement value determined in accor-
dance with EN 61029. The rated noise level of the
power tool is typically as follows:
Sound pressure level:
Uncertainty:
Sound power level:
Uncertainty:
Wear hearing protection!
230 V ∼ 50 Hz
(AC)
140 W
S2: 15 min
II /
(double insulation)
IP20
0–3600 rpm
approx. 3 kg
125 mm
L
= 65 dB (A)
pA
K
= 3 dB
pA
L
= 78 dB (A)
WA
K
= 3 dB
WA
PTSG 140 A1